Notacon 8 Badge Parts Kit

During our second round of parts orders, we purchased enough parts for a few spare kits.  Once they are sold out, though, they are gone!

Includes the following components:

• (1) ATMEGA328P-PU
• (1) 28 pin IC socket
• (4) 0.1µF ceramic capacitor
• (1) 0.1µF electrolytic capacitor
• (1) 100µF electrolytic capacitor
• (1) 22nF ceramic capacitor
• (1) 3mm red LED
• (2) 5mm red CREE LED
• (2) 5mm green CREE LED
• (2) 5mm blue CREE LED
• (1) 2x3 pin header (ICSP)
• (1) 1x6 pin header (TTL-232R)
• (2) 10kΩ ¼W resistor
• (2) 1kΩ ¼W resistor
• (4) 150Ω ¼W resistor
• (2) 100Ω ¼W resistor
• (1) Reset pushbutton switch
• (1) LM2931 voltage regulator
• (1) 16MHz resonator
• (2) CR2032 battery clip
• (2) CR2032 3V battery

Note that this does NOT include the gas alcohol sensor.  You can purchase the directly from Sparkfun at: http://www.sparkfun.com/products/8880

Please consider purchasing the 9V or AA power accessory add-on for the badge if you intend on using the gas sensor or otherwise fully pushing the board to it's limits.  You may order as may kits as you like.  

All kits are guaranteed to have all of the correct parts.  Kits will be triple checked before going out.  If for some reason you are short parts, please let us know and we will replace them free of charge.  ATMEGA328 does not come pre-flashed.  You must do this yourself.